Printed Circuit Board-Based Electrolyte Regulator for Laminar Microfluidics

The trench on a printed circuit board was reconstructed to fabricate a microfluidic framework that allows low-cost production for small quantities and integration with multifunctional elements. An on-chip electrolyte regulator was thus proposed on this platform to analyze diffusion properties in laminar flow. A numerical model was developed, highlighting the interplay between the electrolyte migration and hydrodynamic properties. Solutions with dissolved sodium chloride were simulated and experimentally tested for the regulation of electrical conductivity under the guidance of the normalized Nernst-Planck equation. The diffusion mechanism and the resulting concentration field were demonstrated in detail. This approach provides a satisfactory manufacturing method and a useful tool for integrated microfluidic systems.     

La1-x CaxAl0.8Cr0.2O3/CaZrO3(0≤x≤0.2)复相陶瓷材料发射率的研究

以La2O3、Al2O3、ZrO2、Cr2O3、CaCO3为原料,通过高温固相反应法制备La1-xCaxAl0.8 Cr0.2O3/CaZrO3(0≤x≤0.2)复相陶瓷材料,分别通过XRD、SEM和EDS等仪器对试样的物相组成和显微结构进行分析,利用紫外可见近红外分光光度计测量其红外吸收曲线.结果 表明:当CaZrO3理论生成量和La1-xCaxAl0.8Cr0.2O3的摩尔比小于0.20时复相陶瓷材料在0.76～2.5 μm的发射率较La0.8 Ca0.2Al0.8Cr0.2O3得到进一步提高,当CaZrO3理论生成量和La1-xCaxAl0.8Cr0.2O3的摩尔比为0.04时发射率最佳.     

多孔TiO2负载Pt的制备及室温下催化降解甲醛的研究

以钛酸丁酯为前驱物,通过水解-水热法,成功制备了多孔TiO2,以此为载体,通过化学还原法负载Pt,制得Pt/TiO2复合催化剂.采用XRD、SEM、TEM、N2吸附-脱附等方法对样品的理化性能进行表征,以HCHO为目标污染物,测试了Pt/TiO2催化剂的室温催化活性.实验结果表明:水热处理对样品的微观结构和催化活性有很大影响,水热处理有助于TiO2晶体化,形成层次丰富和形状规则的孔道体系,有助于Pt的分散负载和污染物分子的扩散流通.以多孔TiO2作为载体的催化剂比以P25作为载体的催化剂具有更高的催化活性,多次循环测试,Pt/TiO2催化剂仍具有较高的稳定性.     

Antibiotics-based fluorescent probes for selective labeling of Gram-negative and Gram-positive bacteria in living microbiotas

Gram-staining distinguishes bacteria into two major groups,Gram-positive and Gram-negative bacteria,and has become an essential technique in microbiology.However,Gram-staining is not compatible with living cells and thus limits its applications.Here,we report the development of a polymyxin B-based fluorescent probe that enables selective labeling of Gram-negative in the living microbiota samples.We first synthesized the polymyxin B-Cy3 conjugate and confirmed its specificity for labeling Gram-negative bacteria.In combination with a previously developed Gram-positive-specific fluorescent probe,we demonstrate two-color imaging of Gram-positive and Gram-negative bacteria in various kinds living microbiotas,including mouse gut,human oral,soil,and crude oil microbiotas,with high selectivity and coverage.Finally,a pilot use of the probes in staining bacteria on heat-fixed sputum smear was also demonstrated,showing its potentials in clinical microbiology.Our method provides a versatile tool for distinguishing Gram-positive and Gram-negative bacteria in both basic research and clinical settings.     

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Acta Mechanica Sinica - Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood...     

Scheme to measure the expectation value of a physical quantity in weak coupling regime

In quantum mechanics, the expectation value of an operator can be measured by using the projective measurement, ifthe coupling between the measured system and pointer is strong enough. However in the weak coupling regime, the pointercan not show all the eigenvalue of the physical quantity directly due to the overlapping among the pointer states, whichmakes the measurement of the expectation value difficult. In this paper, we propose an expectation value measurementmethod in the weak coupling regime inspired by the weak measurement scheme. Compared to the projective measurement,our scheme has two obvious advantages. Experimentally we use the internal state and motional state of a single trapped40Ca+ to establish the measurement scheme and realize the proof of principle demonstration of the scheme.     

Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains

Hexagonal boron nitride (BN) platelets, also known as white graphite, are often used to improve the thermal conductivities of polymeric matrices. Due to the poor interfacial compatibility between BN platelets and polymeric matrices, in this study, polyrhodanine (PRd) was used to modify BN platelets and prepared functionalized BN-PRd platelets, thereby enhancing the interfacial interaction between the thermal conductive filler and polymeric matrix. Then, BN-PRd platelets were dispersed into the nitrile butadiene rubber (NBR) matrix to yield high thermally conductive composites. The presence of N? C═S groups in PRd allowed the combination of PRd and NBR chains containing stable covalent bonds via vulcanization reaction. The thermal conductivity of the as-prepared 30 vol% BN-PRd/NBR composite reached 0.40 W/mK, representing an increment of 135% over pure NBR (0.17 W/mK). In addition, the largest tensile strength of NBR composite containing 30 vol% BN-PRd platelets was 880% times of pure NBR. The 30 vol% BN-PRd/NBR composite also displayed a relatively high dielectric constant (9.35 at 100 Hz) and a low dielectric loss tangent value (0.07 at 100 Hz), indicating their usefulness as dielectric flexible materials of microelectronics. In sum, the simplicity and good efficiency of formation of covalent bonds between boron nitride and rubber chains look very promising for large-scale industrial production of high thermally conductive composites.     

Spatial variability and radiation assessment of the radionuclides in soils and sediments around a uranium tailings reservoir,south of China

Journal of Radioanalytical and Nuclear Chemistry - The concentrations of 238U, 226Ra, 232Th and 40K and gross α, β were measured in soils and sediments around a uranium tailings reservoir...